8mm Wool Design Felt End of Bolt

These End of Bolt lengths are the same quality full-width felt by the yard, only reduced 20% off the price per yard when you purchase all the felt remaining on a bolt. These bolts usually have three yards or less remaining on the bolts and all sales of end of bolt material are FINAL SALE.

• Content 100% Merino Wool
• Origin Germany
• Thickness 8 mm (5/16 in)
• Thickness Tolerance ±0.5mm (1/5 in)
• Width 160 cm (63 in)
• Width Tolerance ±4 cm (±1 3/5 in)
• Weight 2240 g / sq m (128 oz / lin yd)
• Backing None
• Primary Uses Architectural Products
• Hanging Panels
• Seat Pads
• Custom Custom colors and custom fabrication including cutting, lamination, stitching, and installation services available
• Durability Light contract or residential (depending on application)
• Maintenance Vacuum occasionally to remove general air-borne debris. Should soiling occur, spot clean with mild soap and lukewarm water. Avoid aggressive rubbing as this can continue the felting process and change the surface appearance of the felt. Refer to 100% Wool Design Felt Maintenance + Cleaning for detailed care instructions.
• Variation Wool felt is a natural material and color variation and inclusions of natural fiber on the surface are evidence of the 100% natural origin of the material. Product color is only indicative, as it is not possible to assure consistency of color in a natural product due to the natural color of raw wool and absorption of dyes. Color matching cannot be guaranteed on shipments and variation will be more pronounced beyond the normal commercial range.
• Environmental 100% biodegradable/compostable, contains no formaldehyde, 100% VOC free, no chemical irritants, and free of harmful substances
• Contributes to LEED©

• Acoustics ASTM C 423: NRC – 0.35, SAA – 0.35
• Colorfastness to Light Class 4 (60 hours)
• Colorfastness to Crocking Class 4.5 (wet), Class 4 (dry)
• Environmental Living Building Challenge Criteria Compliant
• Oeko-Tex Standard 100 Certified Product Class II
• Meets VOC test limits for the CDPH v1.2 method
• Flammability FAR 25.853(a): Pass (60 second vertical burn), Pass (12 second vertical burn)